Kettlebell Press
Pressing the kettlebell away from the body.
97 variations across 9 efforts, 9 positions, 3 implements, 2 rhythms.
What the Kettlebell Press builds
Aggregated from the verified attributes of every variation in the family. Tap a variation for its exact goal profile.
Everything on the kettlebell press
Courses, books, videos and workouts that teach or use the kettlebell press — all in one place.
Videos
1Courses
2Books
3Workouts
23FREE: anyone can watch (members watch ad-free) · 200 XP: unlock once with XP · MEMBERS: included in membership · Prices: buy once or included in membership
All Kettlebell Press variations (97)
Common Kettlebell Press mistakes
These apply across the whole family — every variation inherits them.
Broken wrist grip
The handle sits high in the palm and the wrist bends backward, breaking the line from forearm to hand at the joint. The problems cascade: the wrist joint bears load it was not designed for, the forearm muscles fight an angle they cannot win, the bell bells out, the shoulder rotates, and a shoulder problem starts in the hand.
Fix: Use a hand insertion with a 45-degree handle angle. When cleaning the bell, insert the hand so the handle sits diagonally across the palm, over the wrist, not above it. From this position, a broken wrist grip is physically impossible. Competition kettlebells help because they have a consistent window size regardless of weight. Note: there is also a Hardstyle grip, but the easiest way to avoid this issue is the 45-degree angle.
Why it matters: A broken wrist grip is one of the most common causes of forearm tendon inflammation. The constant tension on the tendons from fighting an unnatural wrist angle causes pain that radiates to the elbow. It also limits pressing strength -- if you cannot press heavy, check the wrist position before blaming the shoulder. The 45-degree handle angle is the foundation of safe pressing, safe racking, and progressing to heavier weight.
The neck is flexed/bent
The neck is flexed/bent and the eyesight may be down while bringing the kettlebell overhead.
Fix: Straighten the neck and keep the cervical in line with the rest of the spine.
Why it matters: A flexed neck while overhead places the cervical spine out of alignment under load. This compromises the stability of the overhead position and can lead to neck strain.
Not using a safety grip when racking double kettlebells
Keeping the fingers wrapped around the handles when racking two kettlebells. When the handles clang together, fingers get caught between them.
Fix: Fingers go behind the handle instead of around it when racking double bells. This keeps fingers out of the space between the handles.
Why it matters: Fingers caught between clanging handles is a common and painful injury with double kettlebell work, especially during heavy double cleans and front squats.
Turning the head once overhead
Once the kettlebell is overhead, the head turns away from the arm that holds the kettlebell.
Fix: Look ahead, chin up, everything aligned straight, i.e. the cervical aligned with the rest of the spine.
Shoulder is raised (scapula elevation) once overhead
The shoulder is raised once the kettlebell is overhead, indicating scapula elevation instead of depression. The arm is loose, the weight is wobbling, and there is no fixation. This could be lack of strength, lack of concentration, or most commonly, lack of shoulder mobility. A telltale sign: leaning back at the top of every rep to get the weight overhead. That is the spine compensating for a shoulder that does not have the range it needs.
Fix: Pack the shoulder down by depressing the scapula. The shoulder should be pulled down and back, not shrugged up toward the ear. If the overhead position requires leaning back, work on shoulder mobility outside of the loaded exercise. Stand next to a wall and push the arm into it. Do bodyweight overhead drills. Check from the side: can the arm go vertical without the spine bending backward? If not, that is the project before adding weight overhead.
Why it matters: An elevated shoulder under load puts the rotator cuff in a compromised position and shifts the load from the skeleton (where it should be) to the muscles of the upper trapezius. This leads to upper trap overuse, neck tension, and reduced pressing capacity. Compensating with spinal extension adds lower back strain on top.
Not straightening the arm when overhead
The arm is not fully straightened when the kettlebell is overhead.
Fix: Fully extend the arm and lock out the elbow when the kettlebell is overhead. Triceps engaged, arm vertical and stacked directly above the shoulder — the bicep ends up closer to the ear as a result of being vertical. If the elbow cannot lock out, the weight may be too heavy or shoulder mobility may be insufficient for overhead work.
Why it matters: A bent elbow overhead means the triceps, biceps, and shoulder muscles are all working to hold the weight in position instead of the skeletal structure supporting it. This fatigues the arm rapidly and creates an unstable overhead position.
Rounded upper back
The upper back rounds during the exercise. Hunched back, no scapula activation. The weight is pulling the lifter forward and the upper back is doing zero work. Just because the exercise is being performed does not mean the upper back is being worked -- it only works if those muscles are intentionally activated.
Fix: Push the chest out. Pull the scapula down. That is the position needed at the top of every rep. If years of desk work have made this area weak and disconnected, work on it outside of training too: push the chest out, pull it down, then up, then forward. Work on all those ranges in warm-ups and during the day.
Why it matters: A rounded upper back means the posterior chain muscles of the upper back are not engaged, which removes half the benefit of exercises like the swing. It also places the shoulder in a vulnerable forward position under load, increasing the risk of impingement and strain over time.
Lowering slowly when a fast return to rack is intended
Lowering from overhead too slowly can waste energy and turn the return into an unintended controlled eccentric. This applies when the goal is an efficient press, jerk, or snatch return. It is not a mistake when a slow eccentric or tempo lower is intentionally programmed.
Fix: For standard or sport-style execution, let the bell drop or pull it down and decelerate near the rack. For tempo or eccentric work, lower under control because that is the intended training effect.
Why it matters: A slow unintended descent wastes energy on every rep. In high-rep sets (jerks, snatches), this compounds quickly and can cut the set short due to shoulder and arm fatigue from fighting the eccentric the entire way down.