The Kettlebell Press — Every Variation, Broken Down
The kettlebell press family covers every overhead push: the strict press (pure shoulder strength, no leg drive), the push press (a dip-and-drive to get heavier weight moving), the jerk (an efficient dip-drive-dip under the bell), and the bent press (a full-body lift that belongs in its own lineage). Each one trains a different quality, and mixing them up is usually why someone's press stalls.
This page lists every press variation in our library. The biomech of each is different — a strict press is a pure shoulder-and-core lift, a push press borrows from the legs, a jerk uses the legs twice. Each link below takes you to the full breakdown: joint actions, muscles worked per phase, tempo guidance, and kettlebell-size recommendations.
Below the variation list, we answer the most common pressing mistakes — pelvic tilt, lost packing of the shoulder, soft wrist — with fixes you can apply on your next rep.
For a deep dive on the purest variation, read our article on the kettlebell strict press.
Every variation in our library
97 Kettlebell Press variations
Each variation has a full biomechanical breakdown — coaching cues, muscles worked, tempo guidance, and a list of common mistakes with fixes.
Double-Arm (5)
Single-Arm (40)
- Bent Press→
- Bent Press with Support→
- Bent Side Press→
- Lateral Flexion Press→
- Runners Lunge Press→
- Side Push Press→
- Single Arm Arch Press→
- Single Arm Belly Press→
- Single Arm Bottoms-Up Press→
- Single Arm Chest Floor Press→
- Single Arm Cross Press→
- Single Arm Half Moon Press→
- Single Arm Half-Kneeling Press→
- Single Arm Hardstyle Push Press→
- Single Arm Hardstyle Push Press (RKC)→
- Single Arm Hardstyle Push Press (StrongFirst)→
- Single Arm Hybrid Floor Press→
- Single Arm Kneeling Press→
- Single Arm Lean Back Press→
- Single Arm Military Press→
- Single Arm Open Palm Press→
- Single Arm Push Press→
- Single Arm Rear Press→
- Single Arm Resistance Band Press→
- Single Arm Seated Press→
- Single Arm Side Press→
- Single Arm Sots Press→
- Single Arm Split Stance Press→
- Single Arm Sportstyle Press→
- Single Arm Sportstyle Push Press→
- Single Arm Strict Front Press→
- Single Arm Strict Shoulder Press→
- Single Arm Thumb Press→
- Single Arm Triceps Floor Press→
- Single Arm Waiters Press→
- Sots Press with Support→
- Spartan Side Press→
- Spiral Press→
- Tripod Press→
- Wrestler Press→
Double Kettlebell (28)
- Double Kettlebell Arch Press→
- Double Kettlebell Belly Press→
- Double Kettlebell Bottoms-Up Press→
- Double Kettlebell Chest Floor Press→
- Double Kettlebell Half-Kneeling Press→
- Double Kettlebell Hardstyle Push Press→
- Double Kettlebell Hardstyle Push Press (RKC)→
- Double Kettlebell Hardstyle Push Press (StrongFirst)→
- Double Kettlebell Hybrid Floor Press→
- Double Kettlebell Kneeling Press→
- Double Kettlebell Lean Back Press→
- Double Kettlebell Military Press→
- Double Kettlebell Open Palm Press→
- Double Kettlebell Push Press→
- Double Kettlebell Rear Press→
- Double Kettlebell Seated Press→
- Double Kettlebell Side Press→
- Double Kettlebell Sots Press→
- Double Kettlebell Sots Press with Rotation→
- Double Kettlebell Split Stance Press→
- Double Kettlebell Sportstyle Press→
- Double Kettlebell Sportstyle Push Press→
- Double Kettlebell Strict Front Press→
- Double Kettlebell Strict Shoulder Press→
- Double Kettlebell Thumb Press→
- Double Kettlebell Triceps Floor Press→
- Double Kettlebell Waiters Press→
- Seesaw Press→
Single Kettlebell Alternating (7)
Double Kettlebell Alternating (4)
Common mistakes
Common kettlebell press mistakes & how to fix them
Lowering slowly when a fast return to rack is intended
Lowering from overhead too slowly can waste energy and turn the return into an unintended controlled eccentric. This applies when the goal is an efficient press, jerk, or snatch return. It is not a mistake when a slow eccentric or tempo lower is intentionally programmed.
Fix: For standard or sport-style execution, let the bell drop or pull it down and decelerate near the rack. For tempo or eccentric work, lower under control because that is the intended training effect.
Broken wrist grip
The handle sits high in the palm and the wrist bends backward, breaking the line from forearm to hand at the joint. The problems cascade: the wrist joint bears load it was not designed for, the forearm muscles fight an angle they cannot win, the bell bells out, the shoulder rotates, and a shoulder problem starts in the hand.
Fix: Use a hand insertion with a 45-degree handle angle. When cleaning the bell, insert the hand so the handle sits diagonally across the palm, over the wrist, not above it. From this position, a broken wrist grip is physically impossible. Competition kettlebells help because they have a consistent window size regardless of weight. Note: there is also a Hardstyle grip, but the easiest way to avoid this issue is the 45-degree angle.
Using a weight too heavy for the task at handuniversal
Using a weight too heavy for the task at hand.
Fix: Use a weight that is appropriate for the task and allows you to maintain good form and technique.
Turning the head once overhead
Once the kettlebell is overhead, the head turns away from the arm that holds the kettlebell.
Fix: Look ahead, chin up, everything aligned straight, i.e. the cervical aligned with the rest of the spine.
Not following progressionuniversal
Not following the progression required to safely learn an exercise and jumping in the deep end.
Fix: Learn the proper progression for the exercise and follow it before advancing.
The neck is flexed/bent
The neck is flexed/bent and the eyesight may be down while bringing the kettlebell overhead.
Fix: Straighten the neck and keep the cervical in line with the rest of the spine.
Shoulder is raised (scapula elevation) once overhead
The shoulder is raised once the kettlebell is overhead, indicating scapula elevation instead of depression. The arm is loose, the weight is wobbling, and there is no fixation. This could be lack of strength, lack of concentration, or most commonly, lack of shoulder mobility. A telltale sign: leaning back at the top of every rep to get the weight overhead. That is the spine compensating for a shoulder that does not have the range it needs.
Fix: Pack the shoulder down by depressing the scapula. The shoulder should be pulled down and back, not shrugged up toward the ear. If the overhead position requires leaning back, work on shoulder mobility outside of the loaded exercise. Stand next to a wall and push the arm into it. Do bodyweight overhead drills. Check from the side: can the arm go vertical without the spine bending backward? If not, that is the project before adding weight overhead.
Environment or set-up limiting natural stanceuniversal
The environment or set-up is limiting the natural stance required for the exercise.
Fix: Ensure adequate space and a flat, stable surface. Remove any obstacles that prevent a natural stance width and foot positioning.
Deep-dive articles
Related kettlebell press articles
Train this with a free KETTLEBELL MONSTER™ account
Every exercise in our library comes with a complete biomechanical breakdown, kettlebell-size recommendations, and 300+ free workouts you can log as you train. No credit card.