Skip to main content
Kettlebell Encyclopedia
Exercise Family

Kettlebell Clean

Ballistic movement bringing the kettlebell to rack position. Can use hip hinge, squat, lunge, or hang pattern.

73 variations.

What the Kettlebell Clean builds

Endurance / conditioninghigh

Aggregated from the verified attributes of every variation in the family. Tap a variation for its exact goal profile.

Everything on the kettlebell clean

Courses, books, videos and workouts that teach or use the kettlebell clean — all in one place.

Videos

1

Books

1

Workouts

20

FREE: anyone can watch (members watch ad-free) · 200 XP: unlock once with XP · MEMBERS: included in membership · Prices: buy once or included in membership

All Kettlebell Clean variations (73)

Alternating Circular CleanAlternating Pass-Through Switch Clean
Alternating Waiters Dead Clean
Alternating Waiters Hang Clean
Bottoms-Up CleanBottoms-Up Horn SwingcleanCircular CleanDead CleanDouble Arm Open Palm SwingcleanDouble Arm SwingcleanDouble Arm Thumb Through Open Palm CleanDouble Kettlebell Bottoms-Up Clean from DeadDouble Kettlebell Dead CleanDouble Kettlebell Dead Start SwingcleanDouble Kettlebell Hang CleanDouble Kettlebell Hardstyle CleanDouble Kettlebell Hardstyle Clean (RKC)Double Kettlebell Hardstyle Clean (StrongFirst)Double Kettlebell Hip Hinge SwingcleanDouble Kettlebell Lawnmower CleanDouble Kettlebell Open Palm Hang CleanDouble Kettlebell Open Palm SwingcleanDouble Kettlebell Pendulum CleanDouble Kettlebell Squat SwingcleanDouble Kettlebell Suitcase CleanDouble Kettlebell Suitcase Hang CleanDouble Kettlebell Swingclean from DeadDouble Kettlebell Waiters Dead CleanDouble Kettlebell Waiters Hang CleanDouble Kettlebell Waiters SwingcleanGoblet CleanGorilla CleanHang CleanHardstyle CleanKettlebell CleanOpen Palm CatchPass-Through Switch CleanSingle Arm Assisted Dead CleanSingle Arm Assisted SwingcleanSingle Arm Bottoms-Up Clean from DeadSingle Arm Dead CleanSingle Arm Dead Start SwingcleanSingle Arm Dead Start Waiters SwingcleanSingle Arm Hang CleanSingle Arm Hardstyle CleanSingle Arm Hardstyle Clean (RKC)Single Arm Hardstyle Clean (StrongFirst)Single Arm Hip Hinge SwingcleanSingle Arm Lateral CleanSingle Arm Lawnmower CleanSingle Arm Lunge Dead CleanSingle Arm Open Palm Dead CleanSingle Arm Open Palm Hang CleanSingle Arm Open Palm SwingcleanSingle Arm Pendulum CleanSingle Arm Split CleanSingle Arm Squat SwingcleanSingle Arm Suitcase CleanSingle Arm Suitcase Hang CleanSingle Arm Swingclean from DeadSingle Arm Waiters Dead CleanSingle Arm Waiters Hang CleanSingle Arm Waiters SwingcleanSingle Kettlebell Alternating Dead CleanSingle Kettlebell Alternating SwingcleanSingle Kettlebell Alternating Waiters SwingcleanSpeed Switch CleanSportstyle CleanSwingcleanUpside Down Horn Grip CleanWaiters Clean

Common Kettlebell Clean mistakes

These apply across the whole family — every variation inherits them.

major

Broken wrist grip

The handle sits high in the palm and the wrist bends backward, breaking the line from forearm to hand at the joint. The problems cascade: the wrist joint bears load it was not designed for, the forearm muscles fight an angle they cannot win, the bell bells out, the shoulder rotates, and a shoulder problem starts in the hand.

Fix: Use a hand insertion with a 45-degree handle angle. When cleaning the bell, insert the hand so the handle sits diagonally across the palm, over the wrist, not above it. From this position, a broken wrist grip is physically impossible. Competition kettlebells help because they have a consistent window size regardless of weight. Note: there is also a Hardstyle grip, but the easiest way to avoid this issue is the 45-degree angle.

Why it matters: A broken wrist grip is one of the most common causes of forearm tendon inflammation. The constant tension on the tendons from fighting an unnatural wrist angle causes pain that radiates to the elbow. It also limits pressing strength -- if you cannot press heavy, check the wrist position before blaming the shoulder. The 45-degree handle angle is the foundation of safe pressing, safe racking, and progressing to heavier weight.

major

Bumping the weight away from the racking position

Bumping or casting the weight away from the racking position to enter the backswing.

Fix: Initiate the drop from racking with a slight forearm rotation to guide the kettlebell base forward and control the descent.

Why it matters: This leads to following the kettlebell and hinging too early.

major

Not pulling long enough (clean)

Not pulling long enough in the clean.

Fix: Extend the pull with the legs until the weight enters ballistic flight, then guide it into the rack.

Why it matters: The arms do the work instead of the legs.

major

The kettlebell is banging and not using high insertion

The kettlebell bangs the forearm during the clean. This happens for several reasons: too much power (bell goes too high and falls back down), weight too far from the body (then pulled in hard), no hand insertion (holding on while it flips), or flipping over the fist instead of guiding it around.

Fix: Pull with the legs, let the weight enter ballistic flight, let go of the handle, insert the hand deep, and catch the weight. The catch needs to happen at the right height -- not too high, not too far out. Transition the grip: hook grip during the pull, then release, open the hand, scoop up. If you hold on the entire time, the handle rotates inside the hand, creating friction, blisters, and ripped skin.

Why it matters: This is the most painful clean mistake and the one that makes people quit the clean entirely. Gloves and wrist wraps do not fix it -- only correct technique does. Persistent banging causes forearm bruising, contusions, and in some cases tendon irritation.

major

No scapula activation

The scapulae are not engaged or activated during the exercise. The upper back and neck strain because the scapula is not doing its job. Common causes: weakness in the upper back muscles, tightness in the chest pulling everything forward, or simply not connecting with the muscles -- the lifter does not feel the position they are in.

Fix: Depress and retract the scapulae. Drill: stand up, extend the arms behind you with elbows straight, go as far back as comfortable and feel the stretch in the pecs. Keep the neck straight -- do not let it creep forward. From there, slowly bring the arms up overhead while pulling back the whole time, then back down. Do it slowly -- when you can do an exercise in slow motion, that is when you own the movement.

Why it matters: Without scapular activation, the upper back has no structure to support load. The cervical spine takes the strain, especially at the top of ballistic movements. This is the most common upper-body injury pathway in kettlebell swings: neck bends forward while the weight pulls, everything is loose, nothing supports the load.

major

Not regripping during the clean or snatch

Holding on tight throughout the clean or snatch without transitioning between grip states. Every phase of the clean and snatch has its own grip: hook grip during the pull, release into ballistic flight, hand insertion at the top, catch in the rack, release on the drop, and back to hook grip. Holding on the entire time means the handle spins inside a closed fist.

Fix: Learn the full grip sequence: hook grip during the pull, let go at ballistic flight, open the hand, insert into the corner, catch the weight with the handle at 45 degrees across the heel of the palm. On the drop, reverse: let the weight come over, regrip into hook grip, stay in extension, then hinge. Practice with the assisted dead clean drill. Drill it slowly until the transitions are automatic.

Why it matters: When the handle rotates inside a closed fist, that is friction. Friction is calluses. Calluses are blisters. Blisters are ripped skin. And eventually the lifter puts the kettlebell down and does not pick it up again. The grip transition is what separates a good clean or snatch from a painful one.

major

The heels are raised

The heels lift off the ground during the swing, clean, or snatch. The ankles bend and the knees drop forward, breaking the vertical shin angle.

Fix: Keep the feet flat on the ground with vertical shins. Weight should be in the heels and mid-foot, never the toes. Note: swing variations that intentionally involve the ankles (such as a squat swing) are excluded -- this applies to the hip hinge variation.

Why it matters: When the heels lift in a hip hinge movement, the load shifts forward onto the knees and quadriceps instead of staying on the posterior chain. This reduces the effectiveness of the exercise and can overload the knee joint.

major

Not fully extending/standing straight

Not fully extending the hips and knees or not standing straight at the top of the movement. The hips stay slightly bent, the knees are still soft, and the glutes never fully engage.

Fix: Stand fully upright at the top of each rep. Squeeze the glutes, push the hips forward, lock the knees. Film yourself from the side -- you will probably be surprised how far from full extension you actually are.

Why it matters: Without full hip extension, the tension never leaves the lower back. The hips never fully open, so the back stays loaded the entire set. This is one of the first things to check when lower back strain appears after swings.

major

Flipping the kettlebell over the fist on the drop

Flipping the kettlebell over the fist on the drop for another clean, half snatch, or other racking exercise. Instead of a controlled transition, the weight rotates over the top of the hand.

Fix: Guide the kettlebell into the drop with forearm rotation and let gravity take over. The base of the bell should always point down and the handle should stay high. Note: the Hardstyle door knock method is a different technique -- this mistake is about uncontrolled flipping, not a deliberate technique.

Why it matters: When the bell flips over the fist, the round part may slam into the forearm. This causes bruising and broken wrist positioning.

major

Rotating the spine in Hardstyle ballistic exercises

Rotating the spine in Hardstyle ballistic exercises.

Fix: Keep the spine from rotation and resist the rotational force. Engage the core and lats to create a rigid torso throughout the swing, clean, or snatch.

major

No hand insertion or 45-degree angle

There is no hand insertion or the handle is not at the correct 45-degree angle when racking. When the lifter holds the handle and the bell flips over the fist, the round part slams into the forearm. This happens with cleans and snatches. Note: there is also a Hardstyle grip, but this mistake is not about that.

Fix: At the top of the movement, let go of the handle. Open the hand. Punch the webbing between the thumb and index finger into the top corner of the handle. This creates a 45-degree angle. The bell sits diagonally across the forearm instead of slamming onto it. This also gives a straight wrist -- no broken wrist grip and no bent elbow to compensate. Start with a light bell until the insertion becomes automatic.

Why it matters: Without the hand insertion, the kettlebell slams into the forearm on every clean and snatch. This causes bruising, forearm contusions, and friction burns from the handle rotating inside a closed fist. It also produces a broken wrist position that transfers stress to the forearm tendons. Gloves and wrist wraps do not fix this -- only correct insertion technique does.

major

Rounded upper back

The upper back rounds during the exercise. Hunched back, no scapula activation. The weight is pulling the lifter forward and the upper back is doing zero work. Just because the exercise is being performed does not mean the upper back is being worked -- it only works if those muscles are intentionally activated.

Fix: Push the chest out. Pull the scapula down. That is the position needed at the top of every rep. If years of desk work have made this area weak and disconnected, work on it outside of training too: push the chest out, pull it down, then up, then forward. Work on all those ranges in warm-ups and during the day.

Why it matters: A rounded upper back means the posterior chain muscles of the upper back are not engaged, which removes half the benefit of exercises like the swing. It also places the shoulder in a vulnerable forward position under load, increasing the risk of impingement and strain over time.

major

Shoulder raising the weight

The shoulder is used to raise the weight instead of the legs and hips driving the movement. The deltoid is doing the lifting work. A diagnostic sign: the arm bends and the kettlebell droops -- it is no longer an extension of the arm.

Fix: Keep the shoulder packed down and let the hips and legs generate the force. The arm stays straight as an extension of the body. If the bell is not traveling up fast with a straight arm, the legs are not doing the work.

Why it matters: This usually happens because the weight is too heavy, too many reps have been performed, or the lifter is not connecting with the explosive hip extension. It shifts the load from the posterior chain to the deltoids, which fatigue fast and can lead to shoulder injuries.

major

Pulling the weight with the arm(s)

The weight is being pulled up with the arms instead of being driven by the hips and legs. The tell: the knees and hips are still bent and the elbow is already bending. That is curling, not cleaning.

Fix: The arm stays straight. The legs power the weight up through hip extension and knee extension while pressing the feet into the ground. The weight enters ballistic flight. Then, and only then, does the elbow bend to bring the hand into position.

Why it matters: If the pull comes from the arm, the biceps and forearm tendons take the full load that the legs were supposed to handle. This is a common cause of bicep soreness and elbow tendon pain after cleans.

major

Rounding the back

The back rounds during the exercise, especially when trying to create more range than flexibility allows.

Fix: Keep the back straight by remaining focused during the exercise. Pull the shoulder blades slightly down and together to push the chest out and keep the shoulders back.

major

The drop from racking is not guided

With the drop for the backswing for a swingclean, you want the weight to fall away from you and then back into you. As you detach the elbows early, the weight starts to fall down rather than away. The reason you want it to fall away is that you want a good, deep backswing.

Fix: Initiate the drop from racking with a slight forearm rotation to guide the kettlebell base forward and control the descent.

Why it matters: Because the drop-away-and-back-in is missing, you also lose the deep hinge and backswing.

medium

Using a weight that is too light for a ballistic/power exercise

Using a weight that is too light for a ballistic or power exercise. If the weight is too light, there is no resistance, and the lifter ends up moving it with the arms because it is so easy. This teaches the wrong movement pattern from day one.

Fix: Use a weight heavy enough that the legs are the only thing that can move it. Starting weight for women: 10-12kg. Starting weight for men: 12-16kg. It depends on height, conditioning, and strength, but the weight needs to be heavy enough that the exercise feels like a leg exercise, not a shoulder raise.

Why it matters: A weight that feels like nothing IS nothing. Without sufficient resistance, the legs have no reason to fire explosively, so the arms compensate. This ingrains the wrong movement pattern and prevents proper force generation. If the weight does not demand leg drive, it is not training what a swing is supposed to train.

medium

More explosiveness required

The clean or snatch lacks sufficient explosiveness. If the kettlebell does not enter ballistic flight, the lifter cannot let go of it. If they cannot let go, they cannot insert the hand. So they end up muscling it up. Everything falls apart from this one mistake.

Fix: The explosive movement from the legs needs to be powerful enough that the weight keeps going on its own when the grip is released. That is what ballistic flight means. Two possible causes: (1) the lifter does not know what explosive force feels like -- fix with squat jumps, that instant power is the target feeling; (2) the weight is too heavy for current ability -- reduce and build back up.

Why it matters: Without sufficient leg drive, the weight never enters ballistic flight. The arms compensate by curling or muscling the weight, which overloads the biceps and forearm tendons. It also prevents the grip transition and hand insertion that make the clean and snatch work correctly. Power from the legs is the foundation everything else depends on.

medium

Elbow disconnected in racking due to tension

The elbow is disconnected from the hip in the racking position due to excess upper body tension.

Fix: Relax the arm and let the elbow rest against the hip in the racking position. The connection should feel natural, not forced.

Why it matters: When the upper body is tense, the elbow lifts away from the hip and the weight is held in front of the body instead of resting on the skeleton. This fatigues the arms and shoulders during what should be a rest or transition position.

medium

Gripping too tight

Gripping the kettlebell handle too tight throughout the entire movement, including phases where grip tension is not needed. A death grip on the handle creates constant tension on the forearm tendons. Those tendons end at the elbow joint, so persistent over-gripping leads to elbow pain, blisters, and ripped calluses.

Fix: Use a hook grip: fingers curled, handle hanging, not squeezed. Grip intensity should cycle with every rep -- weakest at the top of the swing, strongest at the pull-out, then loose again. You are preventing the handle from leaving, not squeezing it.

Why it matters: Constant grip tension overloads the forearm tendons that attach at the elbow. This is the most common cause of elbow pain in kettlebell training and accelerates callus formation, blisters, and skin tears on the hands.

medium

Stiff non-moving zombie arm

The non-working arm is stiff and not moving along with the working arm.

Fix: Move the arm along with the movement of the working arm.

medium

Not enough speed with a ballistic Hardstyle exercise

Not generating enough speed on each rep of a ballistic Hardstyle exercise.

Fix: Generate maximum speed and power on each rep. Hardstyle demands full effort on every repetition.

medium

Thumbs pointing forward for an explosive or powerful clean

The thumbs point forward during a powerful or explosive clean, which is incorrect for Hardstyle and freestyle. This does not apply to Sportstyle.

Fix: Rotate the forearm so the thumb points inward (toward the body) during powerful Hardstyle and freestyle cleans.

medium

Elbow excessively coming out laterally during the clean

The elbow flares out excessively to the side during the clean.

Fix: Keep the elbow close to the body and drive it down and back rather than out to the side.

medium

Seeing the palm of the hand in racking

The palm of the hand is visible in the racking position, indicating incorrect forearm rotation.

Fix: Rotate the forearm so the palm faces inward and the handle sits diagonally across the palm.