Kettlebell Windmill
Windmill patterns with kettlebell load.
7 variations.
Everything on the kettlebell windmill
Courses, books, videos and workouts that teach or use the kettlebell windmill — all in one place.
Workouts
5FREE: anyone can watch (members watch ad-free) · 200 XP: unlock once with XP · MEMBERS: included in membership · Prices: buy once or included in membership
All Kettlebell Windmill variations (7)
Common Kettlebell Windmill mistakes
These apply across the whole family — every variation inherits them.
Broken wrist grip
The handle sits high in the palm and the wrist bends backward, breaking the line from forearm to hand at the joint. The problems cascade: the wrist joint bears load it was not designed for, the forearm muscles fight an angle they cannot win, the bell bells out, the shoulder rotates, and a shoulder problem starts in the hand.
Fix: Use a hand insertion with a 45-degree handle angle. When cleaning the bell, insert the hand so the handle sits diagonally across the palm, over the wrist, not above it. From this position, a broken wrist grip is physically impossible. Competition kettlebells help because they have a consistent window size regardless of weight. Note: there is also a Hardstyle grip, but the easiest way to avoid this issue is the 45-degree angle.
Why it matters: A broken wrist grip is one of the most common causes of forearm tendon inflammation. The constant tension on the tendons from fighting an unnatural wrist angle causes pain that radiates to the elbow. It also limits pressing strength -- if you cannot press heavy, check the wrist position before blaming the shoulder. The 45-degree handle angle is the foundation of safe pressing, safe racking, and progressing to heavier weight.
Incorrect stance in the Windmill
The foot under the kettlebell is turned outward (laterally) instead of being positioned straight or turned slightly inward.
Fix: Position the foot medially about 45 degrees or at least straight.
The kettlebell drifts instead of staying fixed overhead in the windmill
The kettlebell moves forward, backward, or sideways during the windmill instead of staying fixed in one position overhead. If it drifts forward, the deltoids are taking the load instead of the shoulder stabilizers, which can cause shoulder damage. This is often caused by not looking at the kettlebell or not engaging the stabilizers of the shoulder.
Fix: The body revolves around the kettlebell, not the other way around. Keep the eyes on the kettlebell and actively engage the shoulder stabilizers to lock it in place overhead. If the bell drifts, stop and reset.
Shoulder is raised (scapula elevation) once overhead
The shoulder is raised once the kettlebell is overhead, indicating scapula elevation instead of depression. The arm is loose, the weight is wobbling, and there is no fixation. This could be lack of strength, lack of concentration, or most commonly, lack of shoulder mobility. A telltale sign: leaning back at the top of every rep to get the weight overhead. That is the spine compensating for a shoulder that does not have the range it needs.
Fix: Pack the shoulder down by depressing the scapula. The shoulder should be pulled down and back, not shrugged up toward the ear. If the overhead position requires leaning back, work on shoulder mobility outside of the loaded exercise. Stand next to a wall and push the arm into it. Do bodyweight overhead drills. Check from the side: can the arm go vertical without the spine bending backward? If not, that is the project before adding weight overhead.
Why it matters: An elevated shoulder under load puts the rotator cuff in a compromised position and shifts the load from the skeleton (where it should be) to the muscles of the upper trapezius. This leads to upper trap overuse, neck tension, and reduced pressing capacity. Compensating with spinal extension adds lower back strain on top.
Not straightening the arm when overhead
The arm is not fully straightened when the kettlebell is overhead.
Fix: Fully extend the arm and lock out the elbow when the kettlebell is overhead. Triceps engaged, arm vertical and stacked directly above the shoulder — the bicep ends up closer to the ear as a result of being vertical. If the elbow cannot lock out, the weight may be too heavy or shoulder mobility may be insufficient for overhead work.
Why it matters: A bent elbow overhead means the triceps, biceps, and shoulder muscles are all working to hold the weight in position instead of the skeletal structure supporting it. This fatigues the arm rapidly and creates an unstable overhead position.
Focusing on side bending instead of hinging and rotating in the windmill
Treating the windmill as a side bend instead of a hip hinge with thoracic rotation. The movement becomes lateral flexion of the spine rather than pushing the hip out and rotating the thoracic spine to open the chest.
Fix: Push the hip out on the loaded side and hinge while rotating the thoracic spine to open the chest. The free hand travels down the inside of the front leg as a consequence of the hinge and rotation, not from side bending the spine.
Why it matters: Side bending loads the lumbar spine laterally instead of using the hip hinge to distribute the load. The windmill is a hip and thoracic mobility exercise, not a spinal flexion exercise. Side bending it removes the hip and shoulder benefits and puts unnecessary stress on the lower back.
Bending the knees too much in the windmill
Bending both knees excessively during the windmill descent, turning it into a lateral squat pattern instead of a hip hinge with thoracic rotation. The back leg should remain straight with only a soft bend in the front knee.
Fix: Keep the back leg straight and allow only a soft bend in the front (loaded side) knee. The primary movement is pushing the hip out to the side and hinging with thoracic rotation, not squatting down. The depth comes from hip and hamstring flexibility, not knee bend.
Loading the front leg too heavily in the windmill
The weight shifts onto the front leg during the windmill instead of staying primarily in the back (working) leg.
Fix: Keep the weight in the back leg throughout the windmill. The front leg is there for balance and support, not to bear the primary load. Push the hip of the back leg out and hinge from there.
Why it matters: This compromises the hip hinge and reduces the load on the target muscles.